BNX 5010 TPR

Antioxidants Products

UV Light Stablizers Products

Optical Products

Release Coatings Products

Beta Nucleating Masterbatch Products


BNX 5010 TPR is a 50% active pelletized concentrate of the phenolic antioxidant BNX 1010 in an SIS (styrene-isoprene-styrene) thermoplastic rubber.  

Chemistry (Active Component)

Chemical Name:    Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-,

                              1,1′- [2,2-bis[[3-[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]-1-

                              oxopropoxy]methyl]-1,3-propanediyl] ester

CAS Number:        6683-19-8

Chemical Structure:

BNX 5010 TPR

Typical Properties         

Product Form: Solid

BNX 1010 Content: 48 – 52% by weight

Pellet Weight: 0.6 – 1.2 g/50 pellets


BNX 5010 TPR is a 50% active concentrate of BNX 1010 in SIS provided in a convenient pelletized form. This product is recommended for use in the manufacture of hot-melt pressure sensitive adhesives (HMPSA) using single or twin-screw extruders. This unique product can also be used with sigma mixers to achieve a more uniform dispersion of the antioxidant in the HMPSA. BNX 5010 TPR is compatible with a wide range of SIS grades such as Quintac® 3620, Kraton® D1161P, Kraton® D1193, and Vector® 4113.


  • Accurate dispensing in loss-in-weight feeders (i.e. K-TRON®)
    • Uniform pellet shape and size
    • Non-friable pellets that are durable enough for air conveying
    • High melt resistance / non-bridging or blocking
  • Increased processing efficiency
    • Reduced handling time
    • Improved product dispersibility in extruders and sigma mixers
    • Compatible with standard antioxidant metering equipment
    • Minimal screw slippage
  • Improved hygiene
    • Low dusting form minimizes hazards associated with dust generation and accumulation
  • Excellent compatibility with styrenic polymers, engineering plastics, polyurethanes, and PVC
  • Low volatility
  • FDA cleared for use in adhesives

Guidelines for Use

Typical recommended loading concentrations in HMPSA range between 0.4% and 2% (0.2–1% based on the BNX 1010 active component). The exact formulation to be used is dependent on the substrate, performance requirements, and other factors, and should be determined by the user based on testing to simulate actual conditions of use. Please contact Mayzo for specific recommendations.


This product may be stored up to two years in a sealed container. Containers should be kept tightly closed when not in use and stored in a cool, dry place.


Please consult the Safety Data Sheet (SDS) prior to handling or using this product.

FDA Regulations

The components of BNX 5010 TPR have been cleared for use in adhesives under 21 CFR §175.105. Please contact your Mayzo representative for complete details, including restrictions of use.

If the product you are looking for is not listed here, please reach out to us at our contact page.